Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Lynwood
A gate that won’t latch, sags against the driveway, or refuses to open on a LiftMaster or FAAC operator is more than an annoyance in Lynwood. It’s a hole in the security and privacy of your property. We repair and re-hang driveway gates, side-yard gates, and automated entry systems across Lynwood every week. Call (855) 360-4375 for a technician who already knows your system. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Most of our Lynwood work happens on post-WWII small-lot homes where gates sit tight to the property line and get daily use from multiple households. Sagging hinges, rusted posts, and operators that bind are the usual calls. We carry parts and tools for the brands most common around here, and we get your gate back up and running without turning your side yard into a construction site.
Why Lynwood Homeowners Call Gate Repair Lynwood for Gate Repair
A gate is not a garage door, and a handyman who mostly hangs drywall is not who you want diagnosing a control board. Our whole operation is gate-only work. That focus matters on Lynwood’s tighter lots, where a post reset often has to happen without disturbing a neighbor’s fence or a rear unit’s privacy screen.
We know the housing here. The 1940s to 1960s stucco homes off Long Beach Boulevard and Martin Luther King Jr. Boulevard have side driveways that run the full depth of the lot. The gate at the front is usually the only barrier between the street and whatever sits further back. Sometimes that is a second household in a converted garage or an informal rear addition. That means that gate might open and close fifteen times a day, every day, and when it fails, it fails fast.
Our team works on the full ladder of systems that show up around Lynwood, from basic Mighty Mule and Ghost Controls operators on backyard swing gates to commercial-grade FAAC and DoorKing setups on apartment and retail entrances. You don’t have to explain your brand. We recognize it on sight.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Wrought Iron Gate Repair in Lynwood
Wrought Iron Gate Repair in Lynwood usually means restoring a decorative steel gate that has rusted through at the bottom rail or pulled loose from its hinge post. On the older homes near Lynwood Park and the Civic Center, these gates were often custom built to fit a narrow driveway opening. When they sag, the bottom corner drags on the concrete and every opening scrapes away more metal.
Hinge Post Resets on Iron Gates
The real problem is rarely the gate leaf itself. It is the post. On Lynwood’s post-WWII lots, an iron gate might weigh two hundred pounds or more, and it was hung on a post set in a few inches of old driveway slab. After years of use, that post leans toward the load. We cut the old fasteners, set the post plumb with a new concrete footing, and re-hang the gate with adjustable hinges so it clears the slab and latches square.
Rust Repair and Reinforcement
Where rust has eaten through the lower rail, we grind it back, weld in a steel section, and paint it so the repair matches the gate. A typical rust and realignment job in Lynwood runs $280 to $520, depending on how much steel needs to be rebuilt and whether the post can stay or has to be reset. You get a written estimate before any work starts.
Metal Gate Repair in Lynwood
Metal Gate Repair in Lynwood covers the full range of steel and aluminum gates, from lightweight chain-link drive gates to heavy commercial slide panels. These gates share one local failure mode: the concrete they were set in has cracked over years of dry-season soil movement and occasional heavy rain. The gate looks fine from above, but at ground level the post is no longer holding.
Slide Gate Track and Roller Work
On tight shared driveways near Abbott Road and Imperial Highway, a slide gate is often the only option because there is no room for a swing arc. When the slab settles, the gate rolls off the track or the bottom rollers wear flat. We true up the track, shim or replace the rollers, and realign the limit switches so the gate closes fully without the motor stalling.
Post Settling and Panel Realignment
A chain-link or welded steel gate that drags or won’t reach the latch usually has a post that has moved. We excavate around the base, set the post in fresh concrete, and realign the hinges and latch so the panels hang square again. Expect $180 to $390 for a basic single-panel realignment. If the post must be dug out and reset, the job typically runs $350 to $700 in Lynwood.
Trusted Brands We Service in Lynwood
We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. You don’t get shuffled to a different contractor because your gate happens to be a BFT instead of a LiftMaster. Our technicians are equipped to diagnose motor, control board, sensor, and wiring failures across all of those drive systems. For Lynwood customers, that means we come with common replacement parts on the truck instead of telling you we’ll order something and come back next week. Whether it is a Mighty Mule on a driveway gate off Imperial Highway or a FAAC system at a commercial entrance, we work on your brand.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Lynwood Homes
- Hinge posts rusted through at the concrete line. This is our single most common Lynwood repair. The post looks fine up top, but at the slab it has thinned to paper. The fix is cutting out the old footing and setting a new steel post, not tightening the hinges again.
- Wood gates warped and bound after Santa Ana winds. The region’s dry, hot winds pull moisture out of wood gates, and the boards cup and twist. If the gate was hung on undersized posts originally, the whole assembly racks. We replace warped pickets and add steel backing where it helps the gate keep its shape.
- Slide gates jumping track in narrow driveways. When the concrete slab under a slide gate cracks and settles unevenly, the roller wheels lose contact and the gate derails. Safety photocells also get knocked out of alignment by cars parked too close. We true the track and realign the photo eyes so the gate actually closes.
- Automatic operators fighting a gate that weighs too much. On a gate that never swung easily by hand, an opener will burn out the motor or strip the gear. We fix the mechanical bind first, then address the operator. On a gate that won’t swing easily by hand, an opener will burn out the motor or strip the gear. We fix the mechanical bind first, then address the operator.
Pricing for Gate Repair in Lynwood, CA
We Also Serve Cities Near Lynwood
Our gate repair team reaches Lynwood and the surrounding communities every day. If you are in Willowbrook, Watts, Bell Gardens, or Maywood, a gate specialist is already working close by. We know the same post-WWII housing stock and the same small-lot gate configurations in those neighborhoods, so call (855) 360-4375 and describe what is wrong. We answer 24/7 and will book a technician for your street.
Serving Lynwood, CA – Our Local Coverage Area
We serve Lynwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Lynwood
Because the post is moving, not the hinges. On Lynwood’s older small-lot homes, gate posts sit in a thin pad of old driveway concrete that has cracked and shifted after years of dry-season soil movement. Tightening the hinge bolts won’t hold a post that is leaning. We re-set the post in a fresh footing and re-hang the gate with adjustable hinges so it stays plumb. Call (855) 360-4375 for a free estimate.
Yes. The usual cause in Lynwood is a cracked, settled slab under the track, or rollers worn flat from years of daily use. We true the track, replace the rollers, and realign the limit switches so the gate closes fully and the motor stops straining. Estimates are free, so call (855) 360-4375.
Yes. We do this constantly in Lynwood. We work the post from your side, cut the concrete only where the post sits, and support the neighbor’s fence section while we set the new footing. The neighbor’s fence stays up, and your gate ends up square. Call (855) 360-4375 to talk through your specific situation.
Yes, we service those brands and the rest of the common lineup here. On older Lynwood properties, the operator often fails because it has been fighting a mechanically bound gate for years. We diagnose the whole system from the motor to the control board, not just the symptom. Call (855) 360-4375 for a free estimate on repairs.
We check the hinge post first. In Lynwood, rust at the concrete line and post lean cause most hard-opening and latching problems. We check the post before we touch the latch or the hinges, because fixing the latch on a leaning post just moves the problem a few weeks down the road. Call (855) 360-4375 and describe what is happening. We answer 24/7.
Written by Dan Bannister, Owner at Gate Repair Lynwood, serving Lynwood since 2011.