Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Access Control Cost in Lynwood?
Gate access control in Lynwood typically costs $350 to $950 for a keypad, card reader or intercom setup on an existing gate, while a full operator and entry system for a new automated gate runs $1,800 to $5,500. Repairing a control board, sensor or wiring fault usually lands between $150 and $480. The written estimate sets the final price, and estimates here are free.
Those ranges cover the parts that actually go wrong on Lynwood gates: the operator motor, the control board, the safety sensors, the entry device (keypad, card reader, intercom or phone-based opener) and the wiring that ties them together. A Mighty Mule driveway gate and a DoorKing system at a commercial entrance don’t share the same hardware, so the number depends heavily on which one you own. We work on your brand and can usually name it on sight.
Gate Access Control Cost Breakdown (2026)
Here’s how the line items shake out for a gate access job in Lynwood this year. Treat these as typical ranges for planning; the on-site estimate narrows them to your gate.
| Item | Typical Range |
|---|---|
| Keypad or single entry device (supply and install) | $350 – $750 |
| Card reader or fob system | $550 – $950 |
| Intercom or video entry station | $700 – $1,400 |
| Control board replacement | $250 – $480 |
| Safety sensor or loop repair | $150 – $400 |
| Operator motor repair (swing or slide) | $300 – $900 |
| New residential operator with access control | $1,800 – $3,500 |
| Commercial slide operator and entry system | $3,200 – $5,500 |
What pushes a quote toward the top of a range: a gate that needs a new motor and new controls at once, buried wiring that has to be re-run, a commercial entrance that has to keep working during the swap, and a system where the entry device and the operator are different vintages and don’t talk to each other. What keeps it low: a single failed component on an otherwise sound system, or a repair-only visit where the entry device is fine and the control board is the only thing that died.
One pattern we see a lot: a gate “stops taking the code” and the homeowner assumes the keypad is dead, when the actual fault is a control board or a wiring break between the two. Diagnosing that correctly the first time is most of the value here. Call (855) 360-4375 and we’ll sort out which part is actually failing before anyone quotes a replacement.
What Affects Gate Access Control Pricing in Lynwood
- Gate type and drive. Swing and slide operators carry different hardware and labor, and a barrier-arm setup at a commercial entrance is a different job again. We’re equipped on all three, so the quote reflects the drive you have rather than a guess at it.
- Brand and vintage. A residential-level Mighty Mule or Ghost Controls system and a professional-grade FAAC, BFT or DoorKing operator have different parts costs and different control architectures. We service nine named brands, so the technician doesn’t have to order a manual to figure out what he’s looking at.
- Entry device choice. A simple keypad is the cheapest entry point; card readers, fobs, intercoms and phone-based openers climb from there. Multi-unit properties usually need a reader or intercom, which is why HOA and apartment quotes run higher than single-family ones.
- Wiring runs. Distance between the gate, the entry device and the power source drives conduit and wire cost. Lynwood lots with long driveways and a keypad near the house carry more wire than the gate hardware itself in some cases.
- Age of the existing system. When a control board fails on a very old operator and the replacement board won’t talk to the newer entry device, it can be cheaper overall to replace the controls together than to patch them one at a time.
- Residential vs. commercial duty cycle. A gate that opens forty times a day at a commercial entrance needs a heavier operator than a driveway gate opened twice, and the price tracks the duty rating, not just the footprint.
How to Save on Gate Access Control
Get the diagnosis right before you buy parts. Most of the money people waste on gate access is spent replacing a keypad that was never broken, or a motor that was fine once the safety sensors were cleared. A free on-site estimate costs nothing and often tells you the repair is smaller than you feared. Call (855) 360-4375 to book one.
Other ways to keep the number down:
- Fix the entry device, keep the operator. If the motor runs and the gate moves fine, the access control side is a component repair, not a system replacement.
- Match the entry device to the traffic. A single-family driveway doesn’t need a card reader. Putting the right device on the gate avoids paying for capability nobody uses.
- Repair the controls before the operator dies. A failing control board or frayed wiring that gets ignored tends to take the motor with it. Catching it early keeps the job on the low end of the range.
- Bundle the diagnosis. When the estimate covers the whole system in one visit, you’re not paying for the gate to be opened up twice.
If you’re comparing repair against a fresh install, ask the question directly. Sometimes the honest answer is that a $250 board replacement gets you years more out of the gate, and sometimes the operator is at the end of its life and a new install is the better spend. We’ll tell you which one you’re looking at.
FAQs – Gate Access Control Cost
How much does gate access control cost in Lynwood in 2026?
Adding access control to an existing gate in Lynwood typically runs $350 to $950 for a single entry device, or $150 to $480 to repair a control board, sensor or wiring fault. A full new operator with entry system is $1,800 to $5,500 depending on residential or commercial duty. Call (855) 360-4375 for a free estimate on your exact gate.
Is it cheaper to repair my gate operator or replace it?
Repair is cheaper when the fault is isolated – a control board, a sensor or wiring – and typically costs $150 to $480. Replacement starts at $1,800 and climbs, so it only makes sense when the motor is failing too or the old controls won’t work with a current entry device. A free estimate tells you which situation you’re in. Call (855) 360-4375.
Why did my keypad stop opening the gate when the gate still works?
That usually points to the control board or the wiring between the keypad and the operator, not the keypad itself, and diagnosis plus repair typically runs $150 to $480. Replacing the keypad first is a common mistake that doesn’t fix anything. Call (855) 360-4375 and we’ll trace the fault before anyone quotes a part.
Do commercial gate access systems cost more than residential ones in Lynwood?
Yes. Commercial slide operators and entry systems typically run $3,200 to $5,500 against $1,800 to $3,500 for a residential setup, because a commercial entrance opens far more often and needs heavier hardware. The entry device for an HOA or apartment gate also tends to be a card reader or intercom rather than a plain keypad. Call (855) 360-4375 for a quote on your property.
Can someone come out same day to look at my gate?
Same-day visits are often possible, and the estimate itself is free. We answer 24/7 and run fast dispatch from 7am to 7pm, Sunday through Friday. Call (855) 360-4375 and we’ll book the earliest opening that works – a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Why Gate-Only Specialists Quote This Differently
Gate work gets mispriced when it’s treated as a side job. A general handyman quotes the gate as though it were a fence with a motor on it, and a garage door shop quotes it with garage door habits. Neither one carries the parts knowledge for a LiftMaster, Linear or Viking operator, plus a FAAC, BFT, DoorKing, Elite, Ghost Controls or Mighty Mule system on the same truck. We do, because gates are the only thing we work on.
Gate Repair Lynwood has been working on gates in Lynwood since 2011, and we’ve built the business around the single trade. That means our tools, parts knowledge and diagnostic habits are gate-specific – from the motor to the control board. Whether it’s a Mighty Mule on a driveway or a FAAC system at a commercial entrance, the goal is the same: get the gate back up and running with an honest number attached.
Here’s a safety note worth stating plainly. The dangerous parts of a gate access job are the operator’s wiring and power, the heavy panels that can crush a hand or limb, and a slide gate that can come off its track. We don’t hand out step-by-step instructions for working on live wiring or freeing a jammed heavy panel. Those are jobs for a trained technician, and that’s the honest answer even when it costs us a sale. If your gate is stuck, call (855) 360-4375 and we’ll send someone out.
Before you book, it’s worth confirming two things: that the technician’s trade license and insurance check out, and that the city of Lynwood is fine with the work if a permit is required for your change. We’ll point you to the building department for the permit question on any install.
What’s Included in a Free On-Site Estimate
An estimate visit here isn’t a phone guess. A technician walks the gate, identifies the brand and model, tests the operator and controls, and traces the wiring to find where the fault actually sits. You get a written range covering the parts and labor for what the gate needs, so there are no surprises when the invoice arrives.
That brand recognition matters. Nine brands cover the vast majority of what we see in Lynwood: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule. A technician who knows your system already is a technician who finds the fault faster and quotes the right part the first time.
Your Next Step
Pricing on a gate access control job in Lynwood comes down to three things: the brand and drive you have, which component failed, and whether the entry device and operator still work together. Give us a call and we’ll put a real number on all three, in writing, for free. Call (855) 360-4375. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
For everything else we handle on gates in the city, see Lynwood. And if your gate is down and you want the full picture of what we do, start at gate repair Lynwood.
Pricing reflects the Lynwood market as of 2026. Gate Repair Lynwood offers free estimates – call (855) 360-4375.
Written by the team at Gate Repair Lynwood, serving Lynwood since 2011.
What Our Customers Say
"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
- Omar Hassan"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Alejandro Vargas"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Whitney Hoffman