Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Leimert Park, CA
Gate installation in Leimert Park means working with homes that were built with a level of craftsmanship you don’t see in newer LA neighborhoods. The Spanish Colonial Revival and Mission Revival bungalows here often came with hand-forged iron driveway gates in the 1920s and 1930s, and a surprising number of those originals still stand today. That changes how we approach every job: matching period proportions, reusing original hardware where it’s safe, and keeping the streetscape character intact rather than dropping in a generic prefab panel. If your gate is sagging, rusted through at the welds, or the opener has stopped responding, call (855) 360-4375 for a free estimate.
Why Leimert Park Homes Are Different
Leimert Park is a planned community from the 1920s through the 1940s, and the original gates were part of that plan. Walk down any residential street near Degnan Boulevard or around the Leimert Park Plaza and you’ll see wrought iron driveway gates with scrollwork, spear tops, and hand-forged hinges that were set when the homes were built. Those hinges are often still serviceable, but the metal around them has rusted from decades of sun exposure.
The climate here works against iron in specific ways. The strong, dry sun bakes paint off the upper rails first, exposing the metal to morning dew, which is enough to start rust. When the Santa Ana winds come through, gates that have lost material to rust are the ones that twist or snap at the welds. Wood picket garden gates dry out and warp in the same heat, pulling hinges out of alignment. Gate work in Leimert Park is often about wind bracing, rust treatment, and re-welding what’s already there before it fails completely. It’s repair-first work, not replacement-first.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Leimert Park Services
Homeowners in Leimert Park call us about two things most often: gates that have physically failed after decades of sun and Santa Ana winds, and electric openers that have stopped responding. Both need a technician who recognizes what’s already installed before touching anything.
Gate Repair in Leimert Park
Most of the gate repair we do in Leimert Park involves original wrought iron that needs re-welding, rust treatment, or hinge repair, not wholesale replacement. The vintage latches and hand-forged hinges on these 1920s gates fail in predictable ways: rust seizes the pivot, a weld cracks at the top rail, or the gate drops enough to drag on the driveway. We clean and lubricate hardware first, weld only where needed, and match replacement metal to the existing profile so the gate still looks like it belongs to the house. If your gate has stopped swinging freely or is scraping the ground, see our dedicated Gate Repair in Leimert Park page for full details and pricing.
Electric Gate Repair in Leimert Park
Electric gate systems in Leimert Park range from entry-level residential operators on Mighty Mule and Ghost Controls units to professional-grade FAAC and BFT systems at larger properties and commercial entrances. The failure points are consistent across brands: the motor burns out, the control board stops sending signal, the safety sensors misalign, or the wiring between the operator and the keypad degrades in the dry heat. Our techs diagnose from the motor to the control board, and we carry parts for all nine brands we service. For a complete breakdown of how we troubleshoot electric systems, visit our Electric Gate Repair in Leimert Park page.
Gate Installation in Leimert Park
Gate installation in Leimert Park usually means one of two projects: replacing an original 1920s iron gate that’s finally beyond repair, or automating a previously manual gate. The architectural style of the neighborhood matters here. A new gate on a Mission Revival home should echo the proportions and detailing of the original, not look like it was ordered from a big-box catalog. We also account for the Santa Ana winds by setting posts to proper footing depth and adding bracing where the gate span is wide enough to catch real wind load. Whether it’s a full Gate Installation or a simpler driveway gate replacement, the written estimate sets the full price before any work starts.
Automatic Gate Installation
Signs you need it
You’re opening and closing a heavy driveway gate by hand, or the gate has no operator at all and the property needs controlled access.
What it costs in Leimert Park
A full automatic gate installation in Leimert Park, including the operator, safety edges, keypad, and labor, typically ranges from $1,700 to $3,400 depending on gate size and operator brand.
How we do it
We measure the gate width, weight, and swing direction, recommend an operator from the nine brands we service, set the motor mount and post brackets, run the low-voltage wiring, install safety edges and photo eyes, and program the remotes and keypad.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is rusted through, sagging beyond hinge repair, or the posts have shifted and the gate no longer aligns.
What it costs in Leimert Park
A new single driveway gate installed in Leimert Park typically ranges from $900 to $2,400, with wrought iron and custom fabrication at the higher end of that range.
How we do it
We remove the old gate and hardware, set new posts to proper footing depth, fabricate or source the replacement gate to match the home’s period style, hang it on heavy-duty hinges, and adjust the latch and closer.
Electric Gate Installation
Signs you need it
You have a manual gate but want keypad entry, remote access, or integration with an intercom or access control system.
What it costs in Leimert Park
Electric gate installation with a complete operator kit, wiring run, and programming in Leimert Park typically falls between $1,200 and $3,000 depending on swing or slide configuration.
How we do it
We run the power and low-voltage wiring from the panel to the gate, mount the operator arm or slide rack, install safety sensors and edge strips, set travel limits, and program all remotes and entry devices.
Sliding Gate Installation
Signs you need it
Your property has a long or steep driveway where a swing gate would need too much clearance, or you’re replacing a commercial slide gate that’s off its track.
What it costs in Leimert Park
A sliding gate installation in Leimert Park, including track or cantilever system and operator, typically ranges from $1,800 to $3,800 depending on gate length and operator power.
How we do it
We set the track or cantilever posts on proper footings, mount the gate panel, install the slide operator and rack, align the guide rollers, install safety edges and photo eyes, and program the controls.
What Gate Installation Costs in Leimert Park
| Item | Typical range in Leimert Park |
|---|---|
| Driveway gate replacement (single) | $900 – $2,400 |
| Full automatic gate system with operator | $1,700 – $3,400 |
| Sliding gate with track and operator | $1,800 – $3,800 |
These are typical ranges for Leimert Park jobs, not fixed bids. Custom ironwork, long wiring runs from the house panel, and gates wider than a standard driveway push the price up. Every installation is quoted in writing before work begins, so the number you approve is the number you pay.
How long does gate installation take in Leimert Park?
Most residential gate installations in Leimert Park are completed in one day once the gate and operator are on hand. Custom iron fabrication adds one to three weeks for the material work before installation day.
Do you handle the power run and the safety edges?
Yes. We run the electrical from your panel to the operator, install the safety edges and photo eyes that stop the gate when anything is in the path, and program every remote and keypad. One crew handles the whole job.
Brands We Service in Leimert Park
We work on systems from FAAC, BFT, Linear, Viking, and five other major gate brands when you need repair or a new operator to match existing hardware. Most replacement control boards, remotes, safety edges, and keypads are on our service trucks when we arrive, which keeps turnaround short. See our brands page for the complete list, from residential Mighty Mule to commercial DoorKing. If you have a system from a brand we don’t list, we’ll tell you honestly whether the parts are worth sourcing before you spend anything.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Leimert Park, CA
| Service | Typical range in Leimert Park |
|---|---|
| Driveway gate replacement (single) | $900 – $2,400 |
| Full automatic gate system with operator | $1,700 – $3,400 |
| Electric gate installation with operator kit | $1,200 – $3,000 |
| Sliding gate with track and operator | $1,800 – $3,800 |
| Control board replacement | $280 – $550 |
| Safety sensor realignment or replacement | $120 – $260 |
| Keypad or intercom replacement | $180 – $420 |
| Single gate hinge rebuild | $140 – $320 |
Rust damage on original Leimert Park iron gates and custom matching work push material costs up, and long electrical runs from the house panel to a detached garage or rear gate add labor. Every price is set by the written estimate and agreed before work starts, so there are no surprises on the invoice.
Neighborhoods We Serve in Leimert Park
We cover the entire Leimert Park area including the residential streets around the Leimert Park Plaza, the stretch along Degnan Boulevard, homes near Crenshaw Boulevard, and the blocks around Leimert Park Village. We also work the streets between Stocker and Vernon, where many of the original Mission Revival homes still have their period ironwork.
- Leimert Park Village
- Degnan Boulevard area
- Crenshaw Boulevard corridor
- Stocker to Vernon residential blocks
- Leimert Park Plaza vicinity
Response time in Leimert Park is same-day for most repair calls. We answer 24/7 and dispatch from 7am to 7pm, Sunday through Friday.
Service Area – Cities Near Leimert Park
Our gate technicians cover Leimert Park and the surrounding South LA neighborhoods. If you’re in University Park, CA near USC, Morningside Park, CA, Central-Alameda, CA, or Vermont Vista, CA, we can schedule your gate repair on the same route. Call (855) 360-4375 and we’ll confirm the address and give you a straight answer on timing.
Serving Leimert Park, CA – Our Local Coverage Area
We serve Leimert Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Leimert Park
Yes, for repair calls in Leimert Park we schedule same-day where possible. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening.
Most direct gate replacements do not need a permit, but any project that changes the driveway footprint or adds a significant electrical run may need city approval. Ask your city’s building department before starting. We’ll assist you with the details they need.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That covers most residential driveway operators and commercial slide systems installed in Leimert Park without switching vendors.
Call (855) 360-4375 for a free estimate on gate repair or installation in Leimert Park. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Leimert Park Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Tracy Gallagher"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
- Maria Castillo"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
- Omar Hassan