Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Lynwood, CA
Gate Installation in Lynwood usually means fitting a new gate to an older, small-lot property where the old posts were set decades ago in concrete that has since cracked and shifted. We see these jobs every week: a wood or chain-link gate that worked fine for forty years now drags across the driveway, and the post lean tells you the footing gave out long before the hinges did. If you need gate repair or an electric system diagnosed, those have their own pages and phone numbers below. For a new gate installed straight, on posts that will hold, call (855) 360-4375. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Lynwood Homes Are Different
Lynwood is a dense, post-WWII working-class suburb of southeast LA. The housing stock is mostly 1940s to 1960s small-lot stucco homes, many with rear or side units added informally over the years. What that means for gates specifically: the gate is often the primary privacy and security perimeter for multiple households sharing one lot, so it gets cycled open and shut many more times a day than a typical single-family gate would. Hinges, latches, and post bases wear out faster here than almost anywhere else we work.
The lots matter just as much as the houses. Side driveways are long and narrow, and gate posts frequently sit right at or over the property line, set into old driveway concrete. When a post rusts out at the base or the slab cracks around it, the whole gate starts to sag and bind. Neighbors’ shared fences and rear additions make alignment a real variable: a gate that clears its own post may still scrape a fence rail that has drifted a few inches over thirty years. Add hot, dry summers and the Santa Ana winds that dry out and warp wood gates, and you have a repair profile that is less about new equipment and more about re-hanging, re-plumbing, and re-anchoring what is already there. Winters are mild here, but the occasional heavy rain accelerates rust at hinges and latches, and dry-season soil movement loosens post footings over time.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Lynwood Services
Most Lynwood homeowners and property managers call us for one of two reasons: a gate that will not open or close properly, or an electric gate operator that has stopped responding. Both are covered below, each with its own dedicated Lynwood page.
Gate Repair in Lynwood
The typical Lynwood repair call is a sagging driveway or side-yard gate on posts that have never been set deep enough for the load they carry. Wood gates warp in the dry heat and wind; chain-link gates rack out of square when a hinge pulls loose; steel post bases rust through where sprinkler overspray hits them every morning. We cut out the rusted hardware, square the frame back up, and either reset the posts in fresh concrete or re-hang the gate on heavier hinges rated for the actual weight. On older Lynwood lots with informal rear units, we are often re-aligning a gate so it works for two or three households that share the same side yard. Read the full breakdown at Gate Repair in Lynwood.
Electric Gate Repair in Lynwood
Electric gate failures in Lynwood tend to cluster around the operator itself: a motor that hums but will not move, a control board that stopped responding after a power flicker, a sensor or safety edge that keeps tripping for no visible reason. We diagnose from the motor to the control board, across brands like Mighty Mule, LiftMaster, FAAC, and BFT. Residential driveways and small commercial entrances in the area both run these systems, and the failure modes are usually the same: corroded wiring connections, a misaligned photo eye, or a gear or arm that has stripped out under daily use. See the full scope at Electric Gate Repair in Lynwood.
Gate Installation in Lynwood
Gate Installation in Lynwood comes down to two things: setting posts that will actually hold, and building a gate that will not bind as the ground and the frame move through the seasons. Most existing gates here were hung on posts set in the 1950s or 1960s, often in concrete that has since cracked, so a new gate on the old posts is a mistake we talk people out of. We measure the opening, check the property line, dig new footings to proper depth, and build the gate to the exact width and weight the posts can carry. Gate Installation is our primary service, and every job starts with a free on-site estimate and a written price.
Automatic Gate Installation
Signs you need it
You are opening and closing a heavy driveway gate by hand several times a day, or you want controlled access for a property with multiple households or vehicles.
What it costs in Lynwood
Automatic gate installation in Lynwood typically runs from $3,700 to $7,900 for a single swing operator and arms on an existing metal gate, and $7,000 to $15,000 for a slide gate operator and track system.
How we do it
We survey the gate’s weight and swing, check the posts and hinges, run the power and low-voltage wiring, mount the operator, install safety edges and photo eyes, and program the remote controls and travel limits.
Gate Installation Services
Signs you need it
Your existing gate is rusted through at the hinges or post bases, the frame is racked beyond repair, or the driveway opening has shifted enough that the old gate no longer latches correctly.
What it costs in Lynwood
A new pedestrian or side-yard gate in Lynwood typically costs $650 to $1,800, while a driveway gate runs $1,300 to $5,000 depending on material and width.
How we do it
We remove the old gate, check the existing posts or set new ones, build or order the new gate to the exact opening, and hang it on adjustable hinges so it swings true from day one.
What Gate Installation Costs in Lynwood
| Item | Typical range in Lynwood |
|---|---|
| Pedestrian gate, steel or wood | $650 – $1,800 |
| Driveway gate, steel or wood | $1,300 – $5,000 |
| Automatic operator on existing gate | $3,700 – $7,900 |
Is a permit required for a new gate in Lynwood?
Most cities require a permit when a gate spans the full driveway or includes an automatic operator, so ask the Lynwood building department before the job starts. The written estimate sets the final price either way.
Can you install a gate on a narrow side lot?
Yes. We work on Lynwood’s narrow side lots all the time. We check the property line, plan for the swing or slide direction, and set posts in the old driveway slab if that is where the opening sits.
Brands We Service in Lynwood
We work on Mighty Mule, LiftMaster, FAAC, and BFT systems, among the full range of gate operators common on Lynwood driveways and commercial entrances. Our parts knowledge is gate-specific, not split across other trades. See our brands for the full lineup we service.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Lynwood, CA
| Service | Typical range in Lynwood |
|---|---|
| Track repair and alignment | $290 – $749 |
| Hinge replacement | $175 – $390 |
| Roller or wheel replacement | $160 – $375 |
| Gate opener diagnostics | $120 – $480 |
| Gate opener repair | $200 – $700 |
| Panel or slat replacement | $130 – $450 |
| Pedestrian gate, steel or wood | $650 – $1,800 |
| Driveway gate, steel or wood | $1,300 – $5,000 |
| Automatic operator on existing gate | $3,700 – $7,900 |
In Lynwood, the big price drivers are post condition and property-line issues. If a post is rusted into an old slab or sits over a neighbor’s line, that adds labor before we even hang the gate. Every job is quoted and agreed before any work starts, so the written estimate is what you approve, not a starting point.
Neighborhoods We Serve in Lynwood
We cover the full Lynwood grid, from the older blocks near the civic center down to the residential streets that run toward the 105 and the 710. Response time across Lynwood is usually same-day for repair calls when we are already in the southeast LA area.
- Central Lynwood
- Lynwood Gardens
- The area along Long Beach Boulevard
- The blocks near St. Francis Medical Center
- The residential streets north of Martin Luther King Jr. Boulevard
Service Area – Cities Near Lynwood
We work throughout southeast LA, and many of our Lynwood calls come from property owners in the bordering communities. We also serve Willowbrook, CA, Watts, CA, Bell Gardens, CA, and Maywood, CA. If you are in one of those areas, the same gate-only focus and brand coverage applies.
Serving Lynwood, CA – Our Local Coverage Area
We serve Lynwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Lynwood
Call (855) 360-4375 and we answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening within that window.
Yes. We run the power and low-voltage wiring, mount the operator, and install photo eyes and safety edges so the gate stops and reverses if something is in the path. That work is included in the written estimate for automatic gate installation or repair.
We do, and on Lynwood lots this is common. We check the actual line before setting posts, because a gate that drifts too far one way can create a problem with a neighbor’s fence. The goal is a gate that opens fully without crossing anyone else’s space. Call (855) 360-4375 for a free estimate, priced per job and agreed before work starts.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Lynwood Customers Say
"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Katie Lawson"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Tracy Gallagher"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
- Maria Castillo