Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in San Gabriel, CA
Gate installation in San Gabriel means working with older homes, narrow driveway setbacks, and decorative ironwork that has to match the streetscape. We’re a gate-only company, so when a homeowner near the Mission District calls about a driveway gate that no longer closes or an electric opener that trips the breaker, we diagnose the system instead of guessing. Call (855) 360-4375 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why San Gabriel Homes Are Different
San Gabriel’s housing stock runs from 1920s Spanish Colonial Revival and Craftsman bungalows near the Mission to mid-century ranch homes and newer infill builds. Many of the older properties still have their original wrought-iron or wood gates, and those gates were often custom-sized for a specific driveway opening. You can’t swap in a stock panel without changing the look of the house, and in the Mission District there are strict historic preservation guidelines that govern what can be done to a streetscape gate.
The climate compounds it. Hot, dry summers and Santa Ana winds warp wooden gates and loosen iron hinges. Mild, wet winters push moisture into old wood and start rust on untreated steel. A gate that was hung in 1928 needs more than a new hinge bolt when it starts dragging; it needs the sag corrected, the post checked, and the hardware matched so the repair doesn’t stand out. Most San Gabriel calls we run into involve gates with decorative ironwork from the early 20th century that has to be repaired in kind, which means custom fabrication and patience more than a parts catalog.
We also see a lot of mid-century homes where the original gate was built light, and years of wind have worked the post loose in the footing. In those cases the fix is usually a new post set deeper and a reinforced frame, not a patch job on the old one.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main San Gabriel Services
Most San Gabriel homeowners call us for one of two problems: a gate that physically won’t open or close, or an electric gate that has lost its mind. Both routes start with a free on-site estimate and a written price before any work begins.
Gate Repair in San Gabriel
A sagging iron gate, a wood gate that scrapes the concrete, a latch that won’t catch, a slide gate that jumps the track. These are the day-to-day repairs we handle across San Gabriel, from the Mission District bungalows to the ranch homes east of Del Mar. The biggest local variable is age. Gates on 1920s properties often have hand-forged hinges and custom pickets that need fabrication, not replacement. We start by finding out why it failed, then quote the repair. Full details are on the Gate Repair in San Gabriel page.
Electric Gate Repair in San Gabriel
When an opener runs but the gate doesn’t move, or the keypad accepts the code and nothing happens, the problem is usually in the motor, the control board, a sensor, or the power feed. San Gabriel’s older neighborhoods have a mix of original and retrofitted wiring, and we trace the system from the operator back to the panel. We work on Mighty Mule and LiftMaster residential units as well as FAAC and BFT commercial operators. See the Electric Gate Repair in San Gabriel page for what gets checked and typical pricing.
Gate Installation in San Gabriel
New gate installation in San Gabriel is rarely a bolt-in job. The older homes near the Mission often have driveway openings that are not square, not level, and not sized for a modern pre-hung gate. We measure the opening, check the existing posts and footings, and build or order a gate that fits the actual space and the architectural character of the house. If the job calls for automation, we size the operator to the gate weight and run the power correctly. That’s what the Gate Installation service covers from first measure to final swing test.
Automatic Gate Installation
Signs you need it
You’re done getting out of the car to open the gate, or you want controlled access to the driveway without changing the gate’s look.
What it costs in San Gabriel
Automatic gate installation with a new operator, safety edges, and controls typically runs $3,500 to $8,000 depending on gate weight and swing path.
How we do it
We measure the gate, confirm the swing or slide path, set the operator, install photo eyes and safety edges, run power, and test the full open-close cycle.
Driveway Gate Installation
Signs you need it
The old gate is rotted, rusted through, or too far gone to repair economically, and you want a replacement that matches the house.
What it costs in San Gabriel
A new driveway gate with posts, hardware, and installation in San Gabriel typically runs $2,500 to $6,500, with custom iron or wood pushing higher.
How we do it
We pull the old gate, set new posts to proper footing depth, hang the new gate, trim and adjust, and haul the old material away.
Sliding Gate Installation
Signs you need it
The driveway slopes or there isn’t room for a swing gate to arc, so a slide gate is the only layout that works.
What it costs in San Gabriel
A sliding gate with track, v-wheels, and installation typically runs $3,000 to $7,500 depending on length and operator requirements.
How we do it
We set the track and guide posts, hang the gate, align the v-wheels, install the operator and safety loops, and test the full travel.
What Gate Installation Costs in San Gabriel
| Item | Typical range in San Gabriel |
|---|---|
| Standard driveway gate, installed | $2,500 – $6,500 |
| Automatic gate with operator and safeties | $3,500 – $8,000 |
| Sliding gate with track, installed | $3,000 – $7,500 |
Custom ironwork, long driveways, and commercial operators all push a San Gabriel installation toward the top of these ranges. Every job is quoted before we start, and the written estimate is the price you approve.
Can you match a new gate to a 1920s Mission District home?
Yes. We fabricate replacement pickets, rails, and hinges in the same profile and finish as the original. For homes under historic preservation review, we can build to the same period details so the new gate reads as original.
How long does a full gate installation take in San Gabriel?
Most single driveway gates are installed in one day once the gate and posts are on site. Custom fabrication adds lead time, usually one to three weeks, depending on the ironwork. We’ll give you the schedule in writing before any work starts.
Brands We Service in San Gabriel
We work on LiftMaster, Mighty Mule, FAAC, and BFT systems, plus the rest of the major gate brands. That matters in San Gabriel because we see both residential openers and commercial operators, and the diagnostic path is not the same. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in San Gabriel, CA
| Service | Typical range in San Gabriel |
|---|---|
| Gate sag or alignment correction | $200 – $600 |
| Hinge and bracket replacement | $300 – $800 |
| Latch, lock, or keypad replacement | $200 – $600 |
| Electric gate not opening or closing | $300 – $900 |
| Control board replacement | $500 – $1,400 |
| Sensor or photo eye replacement | $250 – $700 |
| Standard driveway gate, installed | $2,500 – $6,500 |
| Automatic gate with operator and safeties | $3,500 – $8,000 |
| Sliding gate with track, installed | $3,000 – $7,500 |
Prices in San Gabriel run higher when custom ironwork, historic-profile matching, or long power runs are involved. The written estimate sets the final price, and you approve it before we start.
Neighborhoods We Serve in San Gabriel
We work throughout San Gabriel, including the Mission District, the neighborhoods around Washington Park, the streets north of Las Tunas, and the older pockets near the San Gabriel Mission Playhouse. Response time across the city is typically the same day when we’re called before noon.
- Mission District
- Washington Park area
- North of Las Tunas
- San Gabriel Mission Playhouse area
- East San Gabriel
Service Area – Cities Near San Gabriel
Our San Gabriel crews also cover the surrounding area. We run calls into Chinatown, CA, Downtown Los Angeles, CA, Little Tokyo, CA, and Maywood, CA on a scheduled basis.
Serving San Gabriel, CA – Our Local Coverage Area
We serve San Gabriel and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in San Gabriel
Yes. We cover the whole city, from the Mission District to the eastern neighborhoods near 91776 and 91775. If you’re in San Gabriel and have a gate problem, we can get a technician to you.
Some San Gabriel gate installations need a city permit, especially in historic districts or when posts go into the public right-of-way. We’ll tell you if your job is likely to need one, and we can handle the submittal if required.
We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Most San Gabriel calls get same-day service when we’re already in the area.
If your gate is sagging, stuck, or dead, call (855) 360-4375. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’ll quote the repair or installation in writing before any work starts.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What San Gabriel Customers Say
"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
- Gilbert Delgado"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Katie Lawson"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Tracy Gallagher